Information and documentation

2-axis positioning system AL 2/15
Category: , , , ,
Design data in DXF format
2-axis positioning system AL 2/15
Category: , , , ,
Design data in STEP format
2-axis positioning system EL 2/1
Category: , , ,
The 2-axis-positioning system EL 2/1 is a highly dynamic pick & place system designed specifically for low-mass flat parts. By overlapping of two movements very short cycle times can be realised.
2-axis positioning system EL 2/1
Category: , , ,
Design data in DXF format
2-axis positioning system EL 2/1
Category: , , ,
Design data in STEP format
Axis configurations
Category: , , , ,
Design data in DXF format
Axis configurations
Category: , , , ,
Design data in STEP format
aiPRESS - control cabinet
Category: , , , ,
Desing data im STEP format
aiPRESS - touchscreen with pedestal
Category: , , , ,
Design data in STEP format
aiPRESS 02-3-129
Category: , ,
Design data in STEP format
aiPRESS 02-3-129 installation system
Category: , ,
Design data in STEP format
aiPRESS 02-3-229
Category: , ,
Design data in STEP format
aiPRESS 02-3-229 installation system
Category: , ,
Design data in STEP format
aiPRESS 6-12-229
Category: , ,
Design data in STEP format
aiPRESS 6-12-229 installation system
Category: , ,
Design data in STEP format
aiPRESS 6-30-277
Category: , ,
Desing data in STEP format
aiPRESS 6-30-277 installation system
Category: , ,
Design data in STEP format
Alignment unit
Category: , , ,
The alignment unit is a compact drive system, which includes two linear and one rotary NC - movements in smallest workspace. Adjusting and testing devices are the perfect applications. This high precision unit is built with a center bore which enables the work with backlight and the cable feed through.
APP5009_Commissioning Manual servoTEC S2
Category: , , ,
This commissioning manual describes work with the programmes S2 Commander and WINPAC.
APP5010_Wiring LV-servoTEC S2
Category: , , ,
In this application document, the user is given information regarding proper wiring specifically regarding the EMERGENCY OFF function with protective door monitoring and EMERGENCY OFF function without protective door monitoring.
APP5016_Opening of the protective door at a PA-CONTROL with servoTEC S2 axes
Category: , , , , , , , ,
How the axes can or may be moved on after being switched off. To solve this task, there are axis parameters, system-R-register, system markers and commands in the PA-CONTROL for which sensible application is discussed in this application document.
APP5021_servoTEC S2 - Drive via digital inputs and outputs
Category: , , ,
Description and information on: Setting of the parameters for the digital inputs and outputs, positioning, Jogging mode, referencing mode, settings in the error management, functional example with up to four destination positions, functional example with up to 16 destination positions.
APP5028_Control of the servoTEC S2 via CANopen
Category: , , ,
A servoTEC S2 is to be controlled via the CAN bus (CANopen) by a master, a PLC or a PC. The following is described in this manual: Wiring with EMERGENCY OFF and safety door monitoring, configuration of the servoTEC S2 with bus mapping, monitoring with heartbeat or node guarding, examples of the PDO communication
APP5038_Substitution of controllers in machines
Category: , , , ,
This application note shows, how to substitute a drive controller for example in case of service purposes.
APP_5039_PA-CONTROL with standard screens
Category: , , ,
The possibility to control the surface of PA-CONTROL out of the PA_CONTROL programs. This application notes describes: output texts, input values and guide the operator.
Auselgerachse Modul 60/33
Category: , , , , , ,
The linear unit module 60/33 (see Figure 3, bottom) was designed for use in the commercial area. Use of a high-quality guide (guide rail and guide carriage) warrants high dynamics and good running behaviour.
Cantilever axes
Category: , , , , , , , , ,
Cantilever axes are specialised linear units for the vertical or horizontal use. Their biggest advantage is the stationary motor.
Cantilever axes Module 68
Category: , , , , , , , ,
The linear units module 68 and module 68 D are precise, linear adjustment units with toothed belt drive that are used in the commercial area as an attachment part in connection with other components.
Cantilever axes Module 90/15
Category: , , , , , , ,
The linear unit module 90/15 was designed for use in the commercial area. Use of a high-quality guide warrants high dynamics and good running behaviour. The internal guide system is protected from contamination by the side covers.
Cantilever axes Module 90/15 telescope
Category: , , , , , , ,
Design data in DXF format
Cantilever axes Module 90/15 telescope
Category: , , , , , , ,
Design data in STEP format
Cantilever axes profiLINE 37 AL
Category: , , , , , ,
Design data in DXF format
Cantilever axes profiLINE 37 AL
Category: , , , , , ,
Design data in STEP format
Blister tape reeling machine smallTAPER
Category: , ,
IEF-Werner provides an automatic taper for the packaging of SMD devices. The unit is available ias an inline or standalone device.
Decentral servo drive
Category:
The decentral servo drive is a motor with integrated servo amplifier and resolver. Two sizes are available. Up to 100 driving sets can be saved in the motor by operating software.
Direct drives
Category: , , , , , , , , , , , , , , ,
The linear drives of euroLINE series with integrated linear motor, position sensor and guide are a ready-to-install solution with reduced engineering effort. Even several independent motors on one guide are possible.
Direct drives euroLINE 120
Category: , , , , , ,
The linear unit euroLINE 120 is a precise, linear adjustment unit with an iron-applied linear motor that is used in the commercial area as an attachment part in connection with other components.
Direct drives euroLINE 170
Category: , , , , , ,
The linear unit euroLINE 170 is a precise, linear adjustment unit with an iron-applied linear motor that is used in the commercial area as an attachment part in connection with other components.
Direct drives euroLINE 32 KLA
Category: , , , , , ,
The linear unit euroLINE 32 KLA is a precise, straight-line adjustment unit with
ironless linear motor that is used as an attachment part in connection with other components in industrial applications
Direct drives euroLINE 32 KPA
Category: , , ,
The euroLINE 32 KPA linear drive unit is a precise, straight-line adjustment unit with piezoceramic drive that is used as an attachment part in Connection with other components in industrial applications.
Rotary drives miniTURN 62, 80, 100
Category: , , , , , ,
Design data in DXF format
Rotary drives miniTURN 62, 80, 100
Category: , , , , , ,
Design data in STEP format
Rotary tables DT 100/140
Category: , , , , , ,
Design data in DXF format
Rotary tables DT 100/140
Category: , , , , , ,
Design data in STEP format
Rotary tables DT 80/100
Category: , , , , , ,
Design data in DXF format
Rotary tables DT 80/100
Category: , , , , , ,
Design data in STEP format
Rotary tables TP 004
Category: , , , ,
Design data in DXF format
Rotary tables TP 004
Category: , , , ,
Design data in STEP format
DT 100/140
Category: , , , , , , ,
The rotary table DT 100/140 with its compact dimensions, high parts accuracy and the soft movement process is used as an attachment in connection with other components in the commercial area.
DT 80/100
Category: , , , , , ,
The rotary table with its compact dimensions, high parts accuracy and the soft movement process is used as an attachment in connection with other components in the commercial area.
Editor PA-CONTROL Touch V 6.20
Category: ,
Article-No.: 1108534
Version 6.20
Energy chain guide system noiseLESS
Category: , , , , , , ,
When using power chains an enormously disturbing noise arises. The noiseLESS system reduces these noises by more than 20 decibel.
Company information IEF-Werner GmbH
Category:
Company information IEF-Werner
Company logos IEF-Werner GmbH
Category:
Company logos IEF-Werner
Firmware PA-CONTROL fieldbus V5.32
Category:
Article-No.: 1061709
Version 5.32
Firmware PA-CONTROL MP V5.31
Category:
Article-No.: 1061706
Version 5.31
Firmware PA-CONTROL servoTEC V5.32
Category:
Article-No.: 1061708
Version 5.32
Firmware PA-CONTROL Single/Compact/Control Unit V5.31
Category: , , ,
Article-No.: 1061707
Version 5.31
Firmware PA-CONTROL Smart V5.32
Category: ,
Article-No.: 1048898
Version 5.32
Firmware PA-CONTROL Touch V 6.20
Category: ,
Article-No.: 1108534
Version 6.20
Guide rails and high-precision adjusters
Category: , , , , , , , , ,
For various applications IEF-Werner offers roller or sliding guides. If these guide rails are used in a complete guiding system one speaks of a slide unit, briefly slide.
Handling components
Category: , ,
The pneumatic gripping, turning and sliding modules permit easy combination with the construction kit system and thus best diversity of solutions.
Startup software servoTEC Drive V5.53
Category:
Article-No.: 1026214
Version 5.53
intelliTool V3
Category: ,
Article-No.: 1107874
Version 3
Conveyor belts MINITRANS
Category: , , , , , , ,
With our wide range of conveyor belts we are able to solve various transport operations. Our modularly structured standard versions enable an uncomplicated and economic adjustment to any customer requirement respectively any ambient condition.
Coordinate tables
Category: , , , , , , ,
Coordinate tables - particularly robust! They are particularly suitable for drilling or milling applications.
Laboratory wheel gauging system R2010
Category: , , , ,
The patented wheel gauging system R2010 was developed for measuring geometrical characteristics of motor vehicle wheels. It combines the functions collection of measuring data, measuring process as well as calculation and displaying of the measured characteristics in one system.
Power amplifier LV-servoTEC
Category: , ,
The servo amplifier are components, which are built into electrical equipment or machines, and can only be commissioned as integral components of such equipment.
Power amplifier LV-Unit
Category:
The power amplifier LV-UNIT is designed for controlling stepper motors. The power amplifier therefore represents the link between external control units and the stepper motors. Amongst others, the PA-CONTROL from IEF-Werner GmbH can be used as the control unit.
linear units in an explosive atmosphere
Category: , , ,
For the usage in an explosive atmosphere IEF Werner offers linear units and even positioning systems.
Spindle drives Linear units
Category: , , , ,
The linear carriage systems are precise, linear adjustment units with spindle drive (ball thread spindle or roller thread drive). The linear carriage Systems named are used as installation parts in connection with other components in the commercial area.
LV-servoTEC S2 1xx
Category: , , ,
The servo positioning controller LV servoTEC S2 1XX (LV servoTEC servo 2nd generation) series devices are intelligent AC servo inverter with substantial parameterisation possibilities and extension options. They are flexible and can be easily adapted to a number of different applications.
LV-servoTEC S2 1xx FS
Category: , , ,
The servo positioning controller servoTEC S2100 FS series devices are intelligent AC servo inverters with substantial parameterisation possibilities and extension options.
LV-servoTEC S2 1xx FSM_STO
Category: , , ,
The safety module FSM 2.0 – STO serves as an expansion of the servo drive servoTEC S2xxx FS to achieve the safety function Safely switched-off torque – “Safe Torque Off” (STO) with SIL3 according to EN 61800-5-2 / EN 62061 / IEC 61508 or category 4 / PL e according to EN ISO 13849-1.
LV-servoTEC S2 3xx
Category: , , ,
LV servoTEC S2 3xx servo positioning controllers are intelligent AC servo converters with extensive parameterisation and extension options. Due to this flexibility, they can be adapted to numerous areas of application.
LV-servoTEC S2 3xx FS
Category: , , ,
The servo positioning controllers of the LV-servoTEC S2 xxx FS series (LV- servoTEC of the 2nd generation for Functional Safety) are intelligent AC servo inverters with extensive parameterisation and extension options.
LV-servoTEC S2 motor data base V1.44
Category: , , ,
Article-No.: 1077046
Version 1.44
LV-servoTEC S2 xxx FS MOV
Category: , , ,
The servo drive LV-servoTEC S2 xxx FS with the safety module FSM 2.0 – MOV is a product with safety relevant functions and is intended for installation in machines or automation systems.
Manual rotary adjusters and NC-rotary tables
Category: , , , , , , , ,
Manual rotary adjusters and NC-rotary tables for various application ranges - now with useful hollow shaft. Advantage: A hollow shaft allows the engineer additional scope to hide tubes and cables.
Manual adjusters domiLINE
Category: , , , , , , , , , , , , , , , , , , , , , , , , , ,
This adjustment slide system will meet any individual requirement. Every axis configuration is conceivable. Whether X-Y, X-Z, X-Y-Z or X-Y-Y-Y or, or, or... In order to cover the whole range of applications, 30, 50, 80 and 120 mm slide widths are available as standard sizes. Complete with spindle and readyassembled.
nanoLINE
Category: , , ,
nanoLINE is suitable for the assembly of smallest components which requres highest assembly precision. The modular bodywork features high flexibility for different assembly requirements. The desktop factory is implemented for the
first time. The low installation size allows a process in the mini-environment.
Innovations 2017
Category: , , , , , , ,
Having the idea itself, is not yet sufficient! That‘s the motto for the year 2017.
Levelling elements
Category: ,
Levelling elements are designed for applications where an accurate adjustment is required. They consist of a levelling screw (fine thread) and a spherical washer. These elements are ideally suitable for levelling of assembly surfaces, that can be machined mechanically with high efforts only.
PA-CONTROL 4 4A Var. D
Category:
Ident-No: 1033743
Manufacturing date: 2002
PA-CONTROL 4-axes CPU4
Category:
Ident-No: 1027195
Manufacturing date: 2002
PA-CONTROL 8-axes CPU4
Category:
Ident-No.: 1027192
Manufacturing date: 2002
PA-CONTROL 8a Var. F
Category:
Ident-No.: 1033744
Manufacturing date: 2002
PA-CONTROL Compact CPU 4
Category: ,
Ident-No.: 1027196
Manufacturing date: 2002
PA-CONTROL CPU4 CAN-Bus
Category:
Ident-No.: 1027198
Manufacturing date: 2002
PA-CONTROL CPU4 LV servoTEC Step
Category:
Ident-No.: 1027129
Manufacturing date: 2002
PA-CONTROL CPU4 LVservoTEC
Category:
Artikel-Nummer: 1027133
Herstellungsjahr: 2002
PA-CONTROL CPU5 servoTEC LV
Category:
Ident-No.: 1027131
Manufacturing date: 2002
PA-CONTROL EP
Category:
Ident-No.:10028795
Manufacturing date: 2002
PA-CONTROL manuals V1.20
Category: , , ,
Article-No.: 1077048
Version 1.20
PA-CONTROL MP
Category: , ,
Die PA-CONTROL MP ist eine 1-Achs-Schrittmotorsteuerung. Das Gerät ist für die Wandmontage zum Einbau in Schaltschränke konzipiert. Das Gerät besitzt eine getrennte Spannungsversorgung für das System (24 VDC) und den Motor (230 VAC).
PA-CONTROL MP
Category:
Ident-No.: 1041110
Manufacturing date: 2003
PA-CONTROL Programmer's Manual
Category: , , , , , ,
Various elements are used for programming in PA-CONTROL.
PA-CONTROL S7 - function bloc for Profibus-connection
Category: , , , , , ,
PA-CONTROL S7 - function bloc for Profibus-connection
PA-CONTROL Interfaces
Category: , , , , , ,
Communication between the PA-CONTROL and other systems can be realized in various ways.
PA-CONTROL servoTEC
Category: , ,
The PA-CONTROL CPU5 is a Controller which was a specially developed für Installation inside an LV-servoTEC servo amplifier. The PA-CONTROL servoTEC Comes into being through the combination of the two devices.
PA-CONTROL Single CPU4
Category: ,
Ident-No.: 1027197
Manufacturing date: 2002
PA-CONTROL Single/Compact/Steuergerät
Category: , , , , ,
The PA-CONTROL Single is a one-axis stepping motor control system. Depending on the device type, the 19/2" module can be assembled with either 2, 3 or 5 phase stepping Motor output stages with motor voltages of either 35V, 60V, 90V or 140V.
PA-CONTROL Smart
Category: , , ,
The PA-CONTROL Smart is a positioning and execution control system. This control system can be adjusted to different demands as regards the number of axes, the number of inputs and outputs as well as the installation surroundings.
PA-CONTROL Smart
Category: ,
Control for servo motors installed into a control cabinet. The PA-CONTROL Smart is a control, which can control up to 16 servo motors and direct drives. The compact appliance is provided for device wall mounting.
PA-CONTROL Smart with LV-servoTEC S2 102 / 105
Category: ,
Ident-No.: 1078981
Manufacturing date: 2008
PA-CONTROL Smart with LV-servoTEC S2 302 / 305
Category: ,
Ident-No.: 1078982
Manufacturing date: 2008
PA-CONTROL Steuergerät with LV-servoTEC S2 102 / 105
Category: ,
Ident-No.: 1078978
Manufacturing date: 2008
PA-CONTROL Steuergerät with LV-servoTEC S2 302 / 305
Category: ,
Ident-No.: 1078980
Manufacturing date: 2008
PA-CONTROL Teachterminal
Category: , ,
This operator's manual describes the program control using the teach terminal HT-2 or the front panel of the control group PA-CONTROL.
PA-CONTROL Touch
Category: , , ,
The PA-CONTROL Touch is a positioning and execution control system.
PA-CONTROL Touch 105
Category: , ,
Design data in STEP format
PA-CONTROL Touch 35
Category: , ,
Design data in STEP format
PA-CONTROL Touch 70
Category: , ,
Design data in STEP format
PA-CONTROL Touch Programmer's Manual
Category: , , ,
PA-CONTROL is a sequence controller. It processes one command after another (e.g. traverse axis, set output, wait for input, etc.). Once a command has been processed, the next command in the program is executed.
PA-CONTROL4 Compact Var. G
Category:
Ident-No.: 1033746
Manufacturing date: 2002
PA-CONTROL4 Single Var. H
Category: ,
Ident-No.: 1033745
Manufacturing date: 2002
Palletising system PSU
Category: , , , , , , ,
Design data in DXF format
Palletising systems
Category: , , , , , , , , , , , , , , , , , , , , , , , , ,
In modern assembly lines an orderly and gentle transfer of the workpieces is required. An intermediate buffering is also often required. The IEF palletising systems are aligned to flexible factory automation and demand-oriented material flow.
Passenger car wheel gauging system R2010
Category: , , , ,
The patented wheel gauging system R2010 was developed for measuring geometrical characteristics of motor vehicle wheels. It combines the functions collection of measuring data, measuring process as well as calculation and displaying of the measured characteristics in one system.
Pneumatic modules
Category: , ,
The pneumatic gripping, turning and linear modules can be combined easily due to the modular design principle and thus allow an optimal solution range.
Positioning system in stainless steel version
Category: , , ,
In the production of contact lenses this stainless steel handling system is used to place the lenses into workpiece carriers.
Positioning systems | spindle, toothed belt, direct drives, cantilever axes
Category: , , , , , , , , ,
Users of positioning systems appreciate individual complete solutions. As they are put into operation und are ready for production quickly - and thus save time and money.
posyART spacer
Category: , , ,
Design data in STEP format
posyART C-frame
Category: , , ,
Design data in STEP format
posyART corner
Category: , , ,
Design data in STEP format
posyART corner
Category: , , ,
Design data in DXF format
posyART up-down level assembly
Category: , , ,
Design data in STEP format
posyART up-down level assembly
Category: , , ,
Design data in DXF format
posyART conveyor belt
Category: , , ,
Design data in STEP format
posyART manual work station
Category: , , ,
Design data in DXF format
posyART manual work station
Category: , , ,
Design data in STEP format
posyART rotary lifting unit
Category: , , ,
Design data in STEP format
posyART lifting-tipping station
Category: , , ,
Design data in STEP format
posyART lift-out station
Category: , , ,
Design data in DXF format
posyART lifting unit
Category: , , ,
Design data in STEP format
posyART lift
Category: , , ,
Design data in STEP format
posyART lift
Category: , , ,
Design data in DXF format
posyART square
Category: , , ,
Design data in STEP format
posyART square
Category: , , ,
Design data in DXF format
posyART clamping element
Category: , , ,
Design data in STEP format
posyART curve 180°
Category: , , ,
Design data in STEP format
posyART curve 90°
Category: , , ,
Design data in STEP format
posyART reader head
Category: , , ,
Design data in STEP format
posyART reader head
Category: , , ,
Design data in SXF format
posyART motor for workpiece carrier size 160 mm
Category: , , ,
Design data in STEP format
posyART motor for workpiece carrier size 200 mm
Category: , , ,
Design data in STEP format
posyART motor for workpiece carrier size 240 mm
Category: , , ,
Design data in STEP format
posyART motor for workpiece carrier size 280 mm
Category: , , ,
Design data in STEP format
posyART motor for workpiece carrier size 320 mm
Category: , , ,
Design data in STEP format
posyART motor for workpiece carrier size 400 mm
Category: , , ,
Design data in STEP format
posyART passive belt movement
Category: , , ,
Design data in STEP format
posyART passive belt movement
Category: , , ,
Design data in DXF format
posyART lateral positioning
Category: , , ,
Design data in DXF format
posyART lateral positioning
Category: , , ,
Design data in STEP format
posyART sensor
Category: , , ,
Design data in STEP format
posyART sensor
Category: , , ,
Design data in DXF format
posyART stopper
Category: , , ,
Design data in STEP format
posyART support
Category: , , ,
Design data in STEP format
posyART support profile
Category: , , ,
Design data in STEP format
posyART point unit
Category: , , ,
Design data in STEP format
posyART workpiece carrier
Category: , , ,
Design data in STEP format
posyART tilt
Category: , , ,
Design data in STEP format
posyART centering unit
Category: , , ,
Design data in STEP format
Product overview
Category: , , ,
To create sophisticated ideas is not a pure chance at IEF-Werner. It is the result of over 30 years of experience in the creation of modular components and applications. This creative process is daily ensured by more than 130 employees. Our modular components enable the realisation of customised machines in a very short time.
QM-Certificate DIN EN ISO 9001
Category:
Quality Management for the sectors development, production and sale of components, subassemblies and systems for automation and motion control.
S2 Commander
Category: , , ,
Article-No.: 1068295
Control cabinets for servo positioning units
Category: , , , ,
IEF Werner is known as supplier for linear units equipped with motors, wiring, energy chain system, amplifi ers and control unit. If required the IEF control components are installed completely into an operational control cabinet.
Slide size 30
Category: , , , ,
The new model range of miniature slides with dovetail guides is especially made for small areas. They are suited for moving and positioning sensors, limited switches or something similar. Their solid construction in gray cast iron, make them suitable for handling machines.
Stepper motor output stage LE12-160
Category: , , , ,
The stepper motor output stage LE12-160 was developed for 2-phase stepper motors. A huge number of practical demands have been met here and a power end stage was developed that is suitable for various applications.
Stepper motor output stage LE3-80
Category: , , , ,
The LE3-80 is a position control for 2-phase stepper motors.
Stepper motor output stage LE8-80
Category: , , , ,
The LE8-80 is a position control for 2-phase stepper motors.
Trainings PA-CONTROL
Category: , , ,
One up to three-day training for operating or service personnel or programmers.
Swivel arm module rotaryARM radius 148,5°
Category: , ,
Design data in STEP format
Swivel arm module rotaryARM radius 199,5°
Category: , ,
Design data in STEP format
Swivel arm module rotaryARM radius 268,5°
Category: , ,
Design data in STEP format
Swivel arm units
Category: , , , , , , , minispin
As a manufacturer of automation solutions, we have to face the challenge of increasing the productivity of our machines. In order to solve these problems, innovative, flexible and simple automation components are required. For fast and precise automation tasks our rotary actuators miniSPIN and rotaryARM are most suitable.
Servo presses aiPRESS
Category: , , , , , , , , , , , , , , ,
aiPRESS servo presses are used to produce accurate and reproduceable joinings. They offer optimal possibilities in customising the joining process to your needs. Process factors such as feed force, running speed, positioning time and accuracy can be adapted precisely by using a large number of optional components.
servoTEC S2 Achsen bei Ansteuerung durch eine Siemens S7 über ProfibusDP
Category: , , ,
Zum Anschluss an ein Profibus-System muss die LV-servoTEC S2 mit einem „ProfibusDP-Modul“ ausgestattet sein. Jedes Bussegment eines PROFIBUS-Netzwerks ist mit Busabschlusswiderständen zu versehen.
smallFLEX
Category:
The modular and flexibly customisable goods carrier transport system smallFLEX allows modification, maintenance and even module exchange during running operation.
Spindle drives
Category: , , , , , , , , , , , , , , , , , , , , , , ,
The IEF positioning units with spindle drive of profiLINE series were developed to combine the excellent features of a linear axis with the characteristics of a precisional slide.
Spindle drives LINE 200 GG
Category: , , , , , ,
Design data in DXF format
Spindle drives LINE 200 GG
Category: , , , , , ,
Design data in STEP format
Spindle drives LINE 250 GG
Category: , , , , , ,
Design data in DXF format
Spindle drives LINE 250 GG
Category: , , , , , ,
Design data in STEP format
Spindle drives MS 60
Category: , , , , , ,
Design data in DXF format
Spindle drives profiLINE 115
Category: , , , , , , , ,
The profiLINE 115 movement unit is a precise, linear adjustment unit with spindle drive that is used in the commercial area as an attachment part in connection with other components.
Spindle drives profiLINE 140
Category: , , , , , , , ,
The profiLINE 140 movement unit is a precise, linear adjustment unit with spindle drive that is used in the commercial area as an attachment part in connection with other components.
Spindle drives profiLINE 200
Category: , , , , , , , ,
The profiLINE 200 movement unit is a precise, linear adjustment unit with spindle drive that is used as an attachment part in connection with other components in industrial applications.
Spindle drives profiLINE 50
Category: , , , , , , , ,
The profiLINE 50 module is a precise, linear adjustment unit with spindle drive that is used in the commercial area as an attachment part in connection with other components.
Spindle drives profiLINE 70
Category: , , , , , , , ,
The profiLINE 70 movement unit is a precise, linear adjustment unit with spindle drive that is used as an attachment part in connection with other components in industrial applications.
Standard cell roboCELL
Category: ,
The standard cell roboCELL is the starting point for automated production
processes. The modular concept allows the adaption to your individual
applications.
stepTEC
Category: ,
The control stepTEC for small stepper motors enables a fast and cost effective realisation of simple applications for small loads and speeds. The connection to superior control units is realised via Ethernet.
Control technology
Category: , , , , , , , , ,
With a new generation of the thousandfold proven control unit PA-CONTROL Touch IEF-Werner sets standards with reference to price, performance and functionality.
Team Viewer QS
Category:
Version 9
Template PA-CONTROL Touch 105 V1.18
Category: ,
Article-No.: 1108824
Version 1.18
Template PA-CONTROL Touch 35 V1.17
Category: ,
Article-No.: 1108822
Version 1.17
Template PA-CONTROL Touch 70 V1.18
Category: ,
Article-No.: 1108823
Version 1.18
Tool PA-CONTROL Touch V 6.20
Category: ,
Article-No.: 1108534
Version 6.20
Touch Screen Terminal
Category:
For operator guidance IEF Werner provides the possibility of a graphic presentation of processes.The Touch-Screen Terminal is available in 5 sizes and is connected to the PA-CONTROL by CAN bus.
Workpiece carrier transport system posyART
Category: , , ,
With posyART you will easily realise individual production processes. For this, IEF Werner offers a clearly structured modular concept for project planning which is tailored to your requirements.
Workpiece carrier transport system posyART
Category: , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
With the posyART transporting and positioning system, the material to be transported is conveyed on motor-driven belt bands or toothed belt bands. The load transmission between belt and the material to be conveyed is done within the system in connection with the carrier.
WINPAC Update V6.20 with manuals
Category: , , ,
Article-No.: 1002912
Version 6.20
Toothed belt- bzw. Spindle drives Module 105(S) and Modul 142(S)
Category: , , , , , , , , , , ,
The linear units module 105 and module 142 are precise linear adjustment units with circumfering toothed-belt drive. The types module 105 S and module 142 S are equipped with spindle drives (ball roller or trapezoid spindle). All linear units named are used as installation parts in connection with other components in the commercial area.
Toothed belt drives
Category: , , , , , , , , ,
Linear units with toothed belt drive allow you an efficient and reasonable solution of your handling task.
Toothed belt drives easyLINE
Category: , , , , , , , ,
The easyLINE module is a precise, linear adjustment unit with toothed belt drive that is used in the commercial area as an attachment part in connection with other components.
Toothed belt drives easyLINE Positionierpaket
Category: , , , , , , ,
Design data in DXF format
Toothed belt drives easyLINE Positionierpaket
Category: , , , , , , ,
Design data in STEP format
Toothed belt drives easyLINE S
Category: , , , , , , ,
The linear module type easyLINE S is a precise, linear positioning unit having a toothbelt drive system. The wide range of IEF Werner linear products can be used for many kinds of industrial automation, either integrated with new or existing automation or in combinations with other IEF Werner linear modules.
Toothed belt drives Module 115/42 (B)
Category: , , , , , , , ,
The linear unit module 115/42 was designed for use in the commercial area. Use of a high-quality guide warrants high dynamics and good running behaviour. The internal guide system is protected from contamination by the toothed belt.
Toothed belt drives Module 160/15
Category: , , , , , , , ,
The linear unit module 160/15 was designed for use in the commercial area.
Use of a high-quality guide warrants high dynamics and good running behaviour. The internal guide system is protected from contamination by the toothed belt.
Toothed belt drives Module 160/15 C
Category: , , ,
Many different aspects are relevant for the selection of suitable linear units. The length has a central role. For this reason, the Modul 160/15 C variant was added to the Modul 160/15. This linear unit is 124 mm shorter than the standard variant.
Toothed belt drives Module 160/15 C
Category: , ,
Design data in DXF format
Toothed belt drives Module 160/15 G
Category: , , , , , , , , , ,
The linear drive unit Module 160/15 G (G means ‘Gegenläufig’ = 'in opposing directions’; was designed for industrial applications. The use of a high-quality guide ensures high dynamics and good running characteristics. The guide elements have special seals which protect them from coarse dirt.
Toothed belt drives Module 160/15 GPA
Category: , , ,
Design data in DXF format
Toothed belt drives Module 160/15 ZR 10
Category: , , , , , , , ,
The linear unit Module 160/15 ZR10 was designed for use in the commercial area. Use of a high-quality guide warrants high dynamics and good running behaviour. The internal guide system is protected from contamination by the toothed belt.
Zahnriemenantriebe Modul 160/20 ZR10
Category: , , , ,
The linear unit 160/20 ZR10 was designed for use in the commercial area. Use of a high-quality guide warrants high dynamics and good running behaviour. The guide carts of the outer guide system are equipped with axial seals to protect from contamination.
Toothed belt drives Module 65/15
Category: , , , , , , , ,
The linear unit module 65/15 was designed for use in the commercial area. Use of a high-quality guide warrants high dynamics and good running behaviour. The internal guide system is protected from contamination by the toothed belt.
Toothed belt drives Module 80/15
Category: , , , , , , , ,
The linear unit module 80/15 was designed for use in the commercial area. Use
of a high-quality guide warrants high dynamics and good running behaviour. The internal guide system is protected from contamination by the toothed belt.
Toothed belt drives Module 80/15 ZR 10
Category: , ,
Design data in DXF format
Toothed belt drives Module 80/15 ZR 10
Category: , ,
Design data in STEP format
Toothed belt drives Module 80/15 ZR10
Category: , , ,
The linear drive unit Module 80/15 ZR10 was designed for industrial applications. The use of a high-quality guide ensures high dynamics and good running characteristics. The toothed belt protects the internal guide system from contamination.
Toothed belt drives Module 80/15 ZR10
Category: , , ,
The linear axis Modul 80/15 is a versatile complete mechatronic system for single or multi-axis movements. IEF Werner added the new variant Modul 80/15 ZR10 to the linear axis family. Higher load with proven compact size and shorter cycle times indicate these variants.
Toothed belt drives Module 160/15 C
Category: , ,
Design data in STEP format

Presorted lists

By using the following links you can limit the large number of documents and files available per category. The list is sorted in alphabetical order. The search function is performed within the selected category:

 

 Brochures and flyers
 Awards and certificates
Operating manuals
Application notes
 Circuit diagrams
 Software
 CAD-data
 Company information and logos

By using the following links you will get a complete overview of all available documents and files. The search function is performed within the entire database. Please note that the displaying can cause longer loading times:

Show all downloads
Show latest downloads

HINWEIS! Diese Website verwendet Cookies und ähnliche Technologien. Wenn Sie die Browser-Einstellungen nicht verändern, stimmen Sie zu.

OK