Control technology

APP5009_Commissioning Manual servoTEC S2
Category: , , ,
This commissioning manual describes work with the programmes S2 Commander and WINPAC.
APP5010_Wiring LV-servoTEC S2
Category: , , ,
In this application document, the user is given information regarding proper wiring specifically regarding the EMERGENCY OFF function with protective door monitoring and EMERGENCY OFF function without protective door monitoring.
APP5016_Opening of the protective door at a PA-CONTROL with servoTEC S2 axes
Category: , , , , , , , ,
How the axes can or may be moved on after being switched off. To solve this task, there are axis parameters, system-R-register, system markers and commands in the PA-CONTROL for which sensible application is discussed in this application document.
APP5021_servoTEC S2 - Drive via digital inputs and outputs
Category: , , ,
Description and information on: Setting of the parameters for the digital inputs and outputs, positioning, Jogging mode, referencing mode, settings in the error management, functional example with up to four destination positions, functional example with up to 16 destination positions.
APP5028_Control of the servoTEC S2 via CANopen
Category: , , ,
A servoTEC S2 is to be controlled via the CAN bus (CANopen) by a master, a PLC or a PC. The following is described in this manual: Wiring with EMERGENCY OFF and safety door monitoring, configuration of the servoTEC S2 with bus mapping, monitoring with heartbeat or node guarding, examples of the PDO communication
APP5038_Substitution of controllers in machines
Category: , , , ,
This application note shows, how to substitute a drive controller for example in case of service purposes.
APP_5039_PA-CONTROL with standard screens
Category: , , ,
The possibility to control the surface of PA-CONTROL out of the PA_CONTROL programs. This application notes describes: output texts, input values and guide the operator.
Power amplifier LV-servoTEC
Category: , ,
The servo amplifier are components, which are built into electrical equipment or machines, and can only be commissioned as integral components of such equipment.
LV-servoTEC S2 1xx
Category: , , ,
The servo positioning controller LV servoTEC S2 1XX (LV servoTEC servo 2nd generation) series devices are intelligent AC servo inverter with substantial parameterisation possibilities and extension options. They are flexible and can be easily adapted to a number of different applications.
LV-servoTEC S2 1xx FS
Category: , , ,
The servo positioning controller servoTEC S2100 FS series devices are intelligent AC servo inverters with substantial parameterisation possibilities and extension options.
LV-servoTEC S2 1xx FSM_STO
Category: , , ,
The safety module FSM 2.0 – STO serves as an expansion of the servo drive servoTEC S2xxx FS to achieve the safety function Safely switched-off torque – “Safe Torque Off” (STO) with SIL3 according to EN 61800-5-2 / EN 62061 / IEC 61508 or category 4 / PL e according to EN ISO 13849-1.
LV-servoTEC S2 3xx
Category: , , ,
LV servoTEC S2 3xx servo positioning controllers are intelligent AC servo converters with extensive parameterisation and extension options. Due to this flexibility, they can be adapted to numerous areas of application.
LV-servoTEC S2 3xx FS
Category: , , ,
The servo positioning controllers of the LV-servoTEC S2 xxx FS series (LV- servoTEC of the 2nd generation for Functional Safety) are intelligent AC servo inverters with extensive parameterisation and extension options.
LV-servoTEC S2 motor data base V1.44
Category: , , ,
Article-No.: 1077046
Version 1.44
LV-servoTEC S2 xxx FS MOV
Category: , , ,
The servo drive LV-servoTEC S2 xxx FS with the safety module FSM 2.0 – MOV is a product with safety relevant functions and is intended for installation in machines or automation systems.
PA-CONTROL manuals V1.20
Category: , , ,
Article-No.: 1077048
Version 1.20
PA-CONTROL MP
Category: , ,
Die PA-CONTROL MP ist eine 1-Achs-Schrittmotorsteuerung. Das Gerät ist für die Wandmontage zum Einbau in Schaltschränke konzipiert. Das Gerät besitzt eine getrennte Spannungsversorgung für das System (24 VDC) und den Motor (230 VAC).
PA-CONTROL Programmer's Manual
Category: , , , , , ,
Various elements are used for programming in PA-CONTROL.
PA-CONTROL S7 - function bloc for Profibus-connection
Category: , , , , , ,
PA-CONTROL S7 - function bloc for Profibus-connection
PA-CONTROL Interfaces
Category: , , , , , ,
Communication between the PA-CONTROL and other systems can be realized in various ways.
PA-CONTROL servoTEC
Category: , ,
The PA-CONTROL CPU5 is a Controller which was a specially developed für Installation inside an LV-servoTEC servo amplifier. The PA-CONTROL servoTEC Comes into being through the combination of the two devices.
PA-CONTROL Single/Compact/Steuergerät
Category: , , , , ,
The PA-CONTROL Single is a one-axis stepping motor control system. Depending on the device type, the 19/2" module can be assembled with either 2, 3 or 5 phase stepping Motor output stages with motor voltages of either 35V, 60V, 90V or 140V.
PA-CONTROL Smart
Category: , , ,
The PA-CONTROL Smart is a positioning and execution control system. This control system can be adjusted to different demands as regards the number of axes, the number of inputs and outputs as well as the installation surroundings.
PA-CONTROL Teachterminal
Category: , ,
This operator's manual describes the program control using the teach terminal HT-2 or the front panel of the control group PA-CONTROL.
PA-CONTROL Touch
Category: , , ,
The PA-CONTROL Touch is a positioning and execution control system.
PA-CONTROL Touch 105
Category: , ,
Design data in STEP format
PA-CONTROL Touch 35
Category: , ,
Design data in STEP format
PA-CONTROL Touch 70
Category: , ,
Design data in STEP format
PA-CONTROL Touch Programmer's Manual
Category: , , ,
PA-CONTROL is a sequence controller. It processes one command after another (e.g. traverse axis, set output, wait for input, etc.). Once a command has been processed, the next command in the program is executed.
S2 Commander
Category: , , ,
Article-No.: 1068295
Control cabinets for servo positioning units
Category: , , , ,
IEF Werner is known as supplier for linear units equipped with motors, wiring, energy chain system, amplifi ers and control unit. If required the IEF control components are installed completely into an operational control cabinet.
Stepper motor output stage LE12-160
Category: , , , ,
The stepper motor output stage LE12-160 was developed for 2-phase stepper motors. A huge number of practical demands have been met here and a power end stage was developed that is suitable for various applications.
Stepper motor output stage LE3-80
Category: , , , ,
The LE3-80 is a position control for 2-phase stepper motors.
Stepper motor output stage LE8-80
Category: , , , ,
The LE8-80 is a position control for 2-phase stepper motors.
Trainings PA-CONTROL
Category: , , ,
One up to three-day training for operating or service personnel or programmers.
servoTEC S2 Achsen bei Ansteuerung durch eine Siemens S7 über ProfibusDP
Category: , , ,
Zum Anschluss an ein Profibus-System muss die LV-servoTEC S2 mit einem „ProfibusDP-Modul“ ausgestattet sein. Jedes Bussegment eines PROFIBUS-Netzwerks ist mit Busabschlusswiderständen zu versehen.
Control technology
Category: , , , , , , , , ,
With a new generation of the thousandfold proven control unit PA-CONTROL Touch IEF-Werner sets standards with reference to price, performance and functionality.
WINPAC Update V6.20 with manuals
Category: , , ,
Article-No.: 1002912
Version 6.20

Control technology

Your consultant:

Andreas Hirt
T: +49 7723 / 925 - 200
F: +49 7723 / 925 - 100

to the contact form
(with upload function)

HINWEIS! Diese Website verwendet Cookies und ähnliche Technologien. Wenn Sie die Browser-Einstellungen nicht verändern, stimmen Sie zu.

OK